Cleaning your MWP bong regularly keeps it looking good, improves the taste, and helps the bong last longer. One of the best things about MWP metal stem with brass cone bongs is how easy they are to clean because the design is simple and easy to take apart.
This guide will show you a simple step-by-step method to clean your MWP bong properly.
Step 1 – Remove the Stem
First, carefully pull the metal stem out of the glass bong.
The metal stem should slide out easily. If it feels tight, gently twist while pulling to avoid damaging the glass.
Once removed, set the stem and brass cone piece aside for cleaning separately.
✔️ Removing the stem makes the bong much easier to clean
✔️ You can clean each part properly
✔️ Prevents dirty water from staying inside the stem
Step 2 – Remove the Silicone Base
If your MWP bong has a silicone base, the next step is to remove it from the bottom of the glass.
Simply peel or slide the silicone base off the glass bottom. The silicone base is flexible, so it should come off easily.
Removing the silicone base allows you to:
-
Clean the glass bottom properly
-
Wash the silicone separately
-
Prevent water getting trapped under the base
-
Keep the silicone looking clean and new
Step 3 – Wash the Glass Bong
After removing the stem and silicone base, you can wash the glass bong directly.
Rinse the bong with warm water first to remove loose residue. Then use cleaning solution or isopropyl alcohol with coarse salt if needed. Shake gently to clean the inside of the glass.
After cleaning, rinse thoroughly with warm water again to remove any cleaning solution.
Then leave the bong to dry completely.
Step 4 – Clean the Stem and Brass Cone
The metal stem and brass cone can be cleaned separately.
You can:
-
Soak them in cleaning solution
-
Use a small brush or pipe cleaner
-
Rinse with warm water
-
Dry completely before reassembling
Keeping the stem and cone clean helps airflow and improves overall performance.
Step 5 – Clean the Silicone Base
Wash the silicone base with warm soapy water, rinse well, and let it dry.
Once everything is dry, place the silicone base back onto the glass bottom and reassemble the bong.
Simple Cleaning Summary ✔️
Cleaning a MWP bong is easy because it comes apart into simple parts:
-
Pull the stem out
-
Remove the silicone base
-
Wash the glass bong
-
Clean the stem and brass cone
-
Wash the silicone base
-
Dry and reassemble
Final Tip
Regular cleaning keeps your bong:
-
Cleaner
-
Better tasting
-
Smoother to use
-
Looking new
-
Lasting longer
Because MWP metal stem bongs are simple in design, they are much easier to clean than complicated glass bongs with percolators. That’s one of the reasons they have remained popular in Australia for so many years.
A clean bong is always a better bong!
Related Articles:
MWP Metal Stem with Brass Cone Bongs – 20 Years of an Australian Classic
